Thousands of workers across NSW now have stronger protections against deadly dust diseases like silicosis with the Minns Labor Government introducing a new legally binding Tunnels and Shafts Code of Practice.
Tunnelling can be a dangerous construction environment with workers potentially being exposed to silica contained in rock and other materials being excavated.
The code brings the safety of tunnelling and underground construction into the modern era with a focus on improving ventilation and exposure controls and reflects the technologies and practices now used to build major infrastructure.
It has been updated to reflect modern tunnel boring methods and contemporary excavation methods as well as modern psychosocial hazards associated with tunnelling including remote working.
It provides updated risk management guidance for tunnel and shaft construction work, including best practice measures to managing exposure to airborne contaminants such as respirable crystalline silica, ventilation, air monitoring and the use of effective control measures.
The new code aims to help reduce workers' exposure to hazardous substances including respirable crystalline silica and supports the prevention of future related diseases among workers by supporting effective risk assessment, engineering controls, ventilation, air monitoring and ongoing review of control measures.
The new code has been developed in consultation with tunnelling health and safety experts, industry representatives, unions, and other key stakeholders and outlines health and safety precautions companies who employ workers in tunnels and shafts must abide by.
It responds to recommendations from the NSW Parliamentary 2024 Review of the Dust Diseases Scheme, which includes recommendations to strengthen protections for workers exposed to respirable crystalline silica during tunnelling and replaces the Tunnels Under Construction Code of Practice 2006.
The code outlines the minimum standards businesses must comply with or risk breaching the Work Health and Safety Act which could result in significant penalties.
The new code builds on the work the Minns Labor Government has done to reduce exposure to respirable crystalline silica and prevent silicosis in NSW including:
- Leading the national ban on engineered stone benchtops, panels and slabs containing one per cent or greater crystalline silica. This includes a national ban on its importation from January 1, 2025.
- Establishing the Tunnelling Dust Safety Taskforce to help address silica related health risks for workers in tunnelling projects. The Taskforce is made up of Government, medical, industry and union representatives and provides expert guidance to prevent and manage silica and other dust related disease associated with tunnelling projects in NSW.
- Establishing a dedicated silica unit within SafeWork NSW which includes a Silica Compliance Team to enforce strengthened regulations, including proactive visits to sites conducting high-risk CSS processing.
- Investing $5 million in critical funding for silicosis research and a patient support program for individuals and their families navigating the health risks associated with exposure to silica dust. The grant funding, administered collaboratively by icare and the Dust Diseases Board, will be provided over three years to the Asbestos and Dust Diseases Research Institute (ADDRI).
- The $2.5 million for a state-of-the-art Lung Bus which is currently travelling NSW to protect workers from dust diseases screening workers who are at risk of developing a workplace dust disease, such as mesothelioma, asbestosis or silicosis.
- Establishing the Silica Worker Register (SWR) to support the ongoing health monitoring of workers undertaking high-risk processing of crystalline silica substances (CSS) across all industries. As at 30 September this year, 20,004 workers were registered on the SWR from 922 businesses. Those registered work mostly in the construction and manufacturing industries.
SafeWork NSW has undertaken extensive compliance and enforcement activity to address respirable crystalline silica risks across NSW workplaces.
Since 1 July 2024, SafeWork NSW inspectors have conducted more than 4,156 workplace visits related to silica. Over this period, inspectors have issued 2,063 improvement notices, 520 prohibition notices and 73 penalty notices relating to respirable crystalline silica across industries.
SafeWork NSW Inspectors conducted a statewide tunnel compliance operation from late-September to early-November following the introduction of the Tunnels and Shafts in Construction Code of Practice.
Inspectors visited three tunnel projects during the operation and issued five improvement notices.
During visits, SafeWork NSW Inspectors observed a strong awareness of the new Tunnelling and Shafts in Construction Code of Practice, with tunnelling contractors proactively conducting gap analysis to ensure WHS systems and procedures aligned with the new requirements.
The Tunnels and Shafts Code of Practice can be viewed at SafeWork NSW Codes of practice.
Minister for Work Health and Safety Sophie Cotsis said:
"Some of this countries' largest infrastructure projects can also be dangerous to work on, and we want to make sure the workers building these major roads and infrastructure are remembered for these incredible projects and not because they contracted a deadly disease.
"This is the first time in 20 years the tunnelling code of practice has been updated, and it is now a legally enforceable minimum standard that must be complied with.
"Silicosis is a preventable disease, and the Minns Labor Government is committed to doing everything we can to minimise exposure to silica from banning engineered stone to introducing this legally binding code of practice."
Minister for Roads and Regional Transport Jenny Aitchison said:
"Workers building the tunnels and transport infrastructure that our state relies on should never have to put their long-term health at risk while doing their jobs.
"We know the consequences of silica exposure can be devastating, not just for workers but for their families and loved ones. That's why the Minns Labor Government is acting.
"This new Code of Practice sets a stronger standard for managing dangerous dust exposure by giving employers clear guidance on the steps they must take to protect workers from harmful substances like silica."
"Our government's message to industry is clear. Protecting workers' health is not optional. We expect businesses to take their responsibilities seriously and make sure every worker gets home safe to their families."
SafeWork Commissioner Janet Schorer said:
"Every worker has the right to come home healthy at the end of the working day. The release of this new Code of Practice is an important step in strengthening protections for workers in the tunnelling industry.
"Silicosis is a devastating and preventable disease. We must continue to take action to reduce workers' exposure to silica dust.
"This Code is one part of SafeWork NSW's broader approach to tackling silicosis. We are also working with industry through the Tunnelling Dust Safety Taskforce to drive stronger prevention and control of hazardous dust across the state.
"The new Code provides practical, contemporary guidance to help businesses identify and control risks. Developed in consultation with industry, unions and subject matter experts, it reflects the realities of modern tunnelling and supports the industry to put effective controls in place.
"SafeWork NSW encourages businesses, workers and other duty holders involved in tunnel and shaft construction to familiarise themselves with the new Code and apply its guidance to their work."