KAIST Develops Flexible Display Readable by Humans and Robots

Korea Advanced Institute of Science and Technology
(From left) Hyo Eun Jeong, integrated master's and Ph.D. student, and Professor Young Min Song of KAIST; (top right, from left) Professor Ki Jun Yu, Ph.D. candidate Chanwoo Lee, and Ph.D. candidate Shinil Cho of Yonsei University, Ph.D. candidate Jae Min Jeon and master's student Jun Seo Lee of GIST.
(From left) Hyo Eun Jeong, integrated master's and Ph.D. student, and Professor Young Min Song of KAIST; (top right, from left) Professor Ki Jun Yu, Ph.D. candidate Chanwoo Lee, and Ph.D. candidate Shinil Cho of Yonsei University, Ph.D. candidate Jae Min Jeon and master's student Jun Seo Lee of GIST.

< (From left) Hyo Eun Jeong, integrated master's and Ph.D. student, and Professor Young Min Song of KAIST; (top right, from left) Professor Ki Jun Yu, Ph.D. candidate Chanwoo Lee, and Ph.D. candidate Shinil Cho of Yonsei University, Ph.D. candidate Jae Min Jeon and master's student Jun Seo Lee of GIST. >

A joint research team from the Korea Advanced Institute of Science and Technology (KAIST) and Yonsei University has developed a flexible display that can communicate information to both humans and robots. Human workers can interpret information through visible color changes, while robots can detect near-infrared patterns invisible to the human eye. The technology could serve as an "electronic tag" attached to products or equipment, allowing humans and robots to monitor work status using the same display.

On November 16, KAIST (President Choongsik Bae) announced that a research team led by Professor Young Min Song from its School of Electrical Engineering, in collaboration with Professor Ki Jun Yu from Yonsei University's School of Electrical and Electronic Engineering, has developed a flexible reflective display capable of conveying information to both human observers and robotic cameras.

concept image
concept image

< concept image >

In factories where humans and robots work side by side, both must be able to identify product types and monitor work status. For example, a label attached to a transport box must help workers determine where to move it while allowing robots to identify the next task. However, information presented solely through colors or text can be difficult to read in dark or hazy environments.

To address this challenge, the research team designed a single display that communicates information differently to humans and robots. While people perceive changes in color, robots use specialized cameras to detect patterns of varying brightness. These cameras operate using near-infrared (NIR) light, which is invisible to the human eye but detectable by NIR cameras.

The display uses reflective technology, meaning it relies on reflected ambient light rather than generating its own light. By applying voltage, the researchers were able to control both the colors visible to humans and the brightness levels detected by NIR cameras.

The key to this approach is PEDOT, a conductive polymer whose light absorption properties change in response to an applied voltage. As the material absorbs more light, the display appears darker; when it absorbs less light and reflects more, the display appears brighter. This effect, in which an electrical signal alters a material's color or light absorption, is known as electrochromism.

The researchers combined this polymer with a thin-film optical structure that causes light to undergo multiple reflections within its layers. By adjusting the voltage, the team controlled the polymer's light absorption and the amount of light reflected from the display. This enabled a single active layer to modulate both visible and NIR light, producing color changes perceptible to humans and brightness changes detectable by NIR cameras.

The team also developed a system for displaying patterns at specific locations. The prototype consists of a 4 × 4 array of 16 pixels, each connected to an individual thin-film transistor (TFT), which acts as a miniature electronic switch. This arrangement allows each pixel to be controlled independently, enabling the display to create different patterns by selectively switching pixels on and off.

To improve practicality, the researchers used a gel electrolyte instead of a liquid electrolyte, reducing the risk of leakage. They also incorporated a flexible substrate, allowing the display to bend and conform to curved surfaces.

To demonstrate its flexibility, the researchers attached the display to the back of a person's hand and successfully controlled the individual pixels. The display continued to operate on the curved surface, with its visible colors and NIR patterns captured using an NIR camera.

The NIR camera also successfully detected the patterns under dark and hazy experimental conditions. In the dark, the researchers illuminated the display with NIR light, allowing the specialized camera to capture the reflected patterns even without visible illumination.

The technology could find applications as electronic tags in smart factories. For example, a display attached to a transport box could indicate its work status through visible colors for human workers and NIR patterns for robots. Its flexibility could also enable applications on curved surfaces, including wearable devices and industrial equipment.

Schematic illustrating the use of a visible/near-infrared dual-band display for information sharing between humans and robots in bright and dark environments.
Schematic illustrating the use of a visible/near-infrared dual-band display for information sharing between humans and robots in bright and dark environments.

< Schematic illustrating the use of a visible/near-infrared dual-band display for information sharing between humans and robots in bright and dark environments. >

The researchers have so far demonstrated a small-scale prototype containing 16 pixels. Expanding the range of information that can be displayed will require higher pixel counts. Further research is also needed to improve durability during prolonged use and repeated bending, as well as to integrate the information captured by cameras into robotic control systems.

"The significance of this study lies in our ability to present both visible color information for humans and near-infrared information for machines on a single flexible display," said Professor Young Min Song. "We hope this technology will evolve into a display platform that can communicate information effectively under different lighting and visibility conditions in environments where humans and robots work together."

"By integrating flexible transistors with electrochromic devices, we enabled independent control of each pixel," said Professor Ki Jun Yu. "We aim to expand this technology to support stable operation of larger pixel arrays, paving the way for a wider range of wearable and curved display applications."

Hyo Eun Jeong, a Ph.D. candidate in an integrated master's and doctoral program at KAIST, and Chanwoo Lee, a Ph.D. candidate at Yonsei University, contributed equally as co-first authors. Professor Young Min Song of KAIST and Professor Ki Jun Yu of Yonsei University served as co-corresponding authors. The study was published in npj Flexible Electronics on October 20, 2026.

Paper title: Flexible active-matrix dual-band electrochromic display based on a Gires-Tournois resonator for human and robotic vision

DOI: 10.1038/s41528-026-00648-z

This research was supported by the Technology Innovation Program funded by the Ministry of Trade, Industry and Energy (MOTIE, Korea); the InnoCORE program of the Ministry of Science and ICT (MSIT); grants from the National Research Foundation of Korea (NRF) funded by the Korean government (MSIT); the Yonsei Fellowship funded by Lee Youn Jae; and the KIST Institutional Program.

/Public Release. This material from the originating organization/author(s) might be of the point-in-time nature, and edited for clarity, style and length. Mirage.News does not take institutional positions or sides, and all views, positions, and conclusions expressed herein are solely those of the author(s).View in full here.