Snakeskin inspires new, friction-reducing material

A research team led by CU Boulder has designed a new kind of synthetic “skin” as slippery as the scales of a snake.

The research, published recently in the American Chemical Society journal Applied Materials & Interfaces, addresses an underappreciated problem in engineering: Friction.

Yifu Ding, senior author of the new paper, explained that every day, machines from robots to cars lose tremendous amounts of energy simply because their parts rub together. To try to reduce that loss, he and his colleagues took cues from nature-specifically, its most slithery members.

“A snake’s body is soft enough that it can twist itself into all kinds of shapes,” said Ding, a professor in the Paul M. Rady Department of Mechanical Engineering. “It can also move really fast if it needs to, in part because its skin has such low friction.”

In their latest study, the researchers developed a tool called solid-liquid interfacial polymerization (SLIP) that allows them to lay a thin layer of skin onto existing surfaces like rubber or stretchy materials called elastomers. That layer looks a lot like the scales of a snake and can turn an otherwise sticky surface into a slip hazard.


Close up image of snake scales.

Textured

Top: Snake scales seen up close; bottom: Snakeskin-inspired synthetic “skin” seen under the microscope. (Credits: Pixabay; Ding lab)

The technology could be a boon for machines that battle friction but can’t tolerate getting wet.

“There are a lot of new engineering applications, like soft robots or wearable sensors, where you can’t use these traditional liquid lubricants,” Ding said. “Rather, you have to modify the surface itself.”

That’s now possible, thanks to the oft-hated snake.

What’s in a scale?

Snakes, from striped garter snakes to bright-green vine snakes, owe a lot of their success to their scales. If you put one of these small structures under a microscope, you’ll notice that they’re made up of many layers of tissue stacked on top of each other.

“The top layer is like keratin, what our fingernails are made of,” Ding said. “It’s very brittle and stiff. Then the scale gradually transitions to a much softer material below.”

That combination of hard on top of soft gives snakes their edge, helping them to keep their friction low while still remaining flexible. It’s also the feature that Ding and his colleagues wanted to replicate in the lab.

The group began with a base made out of polydimethylsiloxane (PDMS), an elastic material common in many medical technologies. The researchers then used the SLIP technique to place a thin, scale-like layer of synthetic material onto that foundation.

The method, Ding explained, works by mixing small molecules into a film of liquid, then using light to get them to fall out of suspension-a bit like peas sinking to the bottom of a bowl of soup. Once there, those building blocks infiltrate the PDMS and form a hybrid skin layer.

This results in the laboratory equivalent of snakeskin boots.

“Nothing sticks to it,” Ding said. “You can touch it, and your finger will slip.”

Slipping and sliding

To prove just how snake-like their invention is, he and his colleagues-including Mengyuan Wang, who recently earned her PhD from CU Boulder-ran a series of seemingly simple tests. The group attached weights to both the hybrid and normal PDMS, then put them on various slanting surfaces.

The team’s snakeskin-treated PDMS skidded down even slight inclines, Wang said, while the plain material didn’t budge.

“PDMS is really sticky,” Wang said. “Even when you completely flip it upside down, it will still stick to surfaces.”

The team’s snakeskin has similar levels of friction to many ceramic materials and shiny metals, the group found. Ding added that the SLIP method is nimble enough that it can lay down this skin in any pattern, including in shapes that spell out words.

The group still has a lot of work ahead of it before it can start applying its slippery surface to real robot joints. But the research is yet another reason to thank a friendly snake.

“When we’re designing new materials, we don’t always know what kind of structure to make,” Ding said. “But if there’s an example in nature, it’s already proven that it can work, so we can just mimic that.”

/Public Release. This material comes from the originating organization and may be of a point-in-time nature, edited for clarity, style and length. View in full here.