New Study Unveils Ultrathin Boron Nitride Films for Next-generation Electronics

An international team of researchers, affiliated with UNIST has unveiled a novel material that could enable major leaps in the miniaturization of electronic devices. Published in the prestigious journal Nature, this study represent a significant achievement for future electronics.

This breakthrough comes from a research, conducted by Professor Hyeon Suk Shin (School of Natual Sciences, UNIST) and Principal Researcher Dr. Hyeon-Jin Shin from Samsung Advanced Institute of Technology (SAIT), in collaboration with Graphene Flagship researchers from University of Cambridge (UK) and Catalan Institute of Nanoscience and Nanotechnology (ICN2, Spain).

In this study, the team successfully demonstrated the synthesis of thin film of amorphous boron nitride (a-BN) with extremely low dielectric constant as well as high breakdown voltage and superior metal barrier properties. The research team noted that this newly fabricated material has great potential as interconnect insulators in the next-generation of electronic circuits.

In the ongoing process of miniaturization of logic and memory devices in electronic circuits, minimizing the dimensions of interconencts – metal wires that link the different device components on the chip – is crucial to guarantee improved performance and faster response of the device. Extensive research efforts have been devoted to decreasing the resistance of scaled interconnects because integration of dielectrics using complementary metal oxide semiconductor (CMOS) compatible processes has proven to be exceptionally challenging. According to the research team, the required interconnect isolation materials should not only possess low relative dielectric constants (referred to as k-values), but should also be thermally, chemically, and mechanically stable.

[연구그림] 비정질 질화붕소 증착과정

Schematic images, showing the process of a -BN sample grown on a Si substrate at T= 673K. Atomic species are shown in different colours: Si (yellow), Blue (N), Pink 3 (B).

There has been an ongoing quest to obtain materials with ultra-low-k (relative permittivity around or below 2) avoiding the artificial addition of mesoporosity in the thin film in the semiconductor industry for at least the past 20 years. Several attempts had been made to develop materials with desired characteristics, yet those materials have systematically failed to be successfully integrated in interconnects due to poor mechanical properties or poor chemical stability upon integration, causing reliability failures.

In this study, the joint research has succeeded in demonstrating a Back End of the Line (BEOL) compatible approach to grow amorphous Boron Nitride (a-BN) with extremely low-k dielectrics. In particular, they synthesized approximately 3 nm thin a-BN on a Si substrate, using low temperature remote inductively coupled plasma-chemical vapour deposition (ICP-CVD). The resulting material showed an extremely low dielectric constant in the range of 1.78, which is 30% lower than the dielectric constant of currently available insulators.

“We found that temperature was the most important parameter with ideal a-BN film deposition occurring at 400° C,” says Seokmo Hong in the Doctoral program of Natural Sciences, the first author of the study. “This material with ultra-low-k also manifests a high breakdown voltage and likely superior metal barrier properties, making the film very attractive for practical electronic applications.”

Angle-dependent near-edge X-ray absorption fine structure (NEXAFS) measured in partial electron-yield (PEY) mode at Pohang Light Source-II 4D beam line was also used to investigate the chemical and electronic structures of a-BN. Their findings indicated that the irregular atomic arrangement causes the dielectric constant value to drop.

Remote ICP-CVD system with borazine mass flow controller (MFC) for precise control of borazine flow. The a-BN films were grown on Si substrates at 400 °C.

The new material also manifests excellent mechanical properties of high strength. Moreover, when researchers tested the diffusion barrier properties of a-BN in very harsh conditions, they found it can prevent metal atom migration from the interconnects into the insulator. This result will help resolves a long-standing issue of interconnects in CMOS integrated circuit fabrication, enabling further miniaturaization of electronic devices.

“Development of electrically, mechanically and thermally robust low-k materials (k

“Our results demonstrate that the amorphous counterpart of two-dimensional hexagonal BN possesses the ideal low-k dielectric characteristics for high-performance electronics,” says Professor Shin. “If they are commercialized, it will be a great help in overcoming the crisis looming over the semiconductor industry, such as China’s aggressive moves to boost semiconductors and Japan’s export restrictions on Korea.”

Professor Manish Chhowalla, based at Graphene Flagship partner University of Cambridge, UK and Professor Stephan Roche from the Catalan Institute of Nanoscience and Nanotechnology (ICN2), Spain also participated in the study. The results of the study have been published in the prestigious journal, Nature on June 24, 2020. Their work has been supported by Samsung Electronics, the IBS, and the grant from the Center for Advanced Soft Electronics under the Global Frontier R&D Program through the National Research Foundation by the Ministry of Science and ICT, Korea.

Journal Reference

Seokmo Hong, Chang-Seok Lee, Min-Hyun Lee, et al., “Ultra-low dielectric constant amorphous boron nitride,” Nature, (2020). DOI: 10.1038/s41586-020-2375-9

/Public Release. View in full here.