Development of new technology for wastewater treatment for semiconductor production

National Research Council of Science & Technology

Alcohols are used to remove impurities on the surface of semiconductors or electronics during the manufacturing process, and wastewater containing alcohols is treated using reverse osmosis, ozone, and biological decomposition. Although such methods can lower the alcohol concentration in wastewater, they are ineffective at completely decomposing alcohols in wastewater with a low alcohol concentration. This is because alcohol is miscible in water, making it impossible to completely separate from alcohol using physical methods, while chemical or biological treatments are highly inefficient. For this reason, wastewater with a low alcohol concentration is primarily treated by diluting it with a large amount of clean water before its discharge.

The Korea Institute of Science and Technology (KIST, President Seok-Jin Yoon) has announced that a research team led by Dr. Sang Hoon Kim and Dr. Gun-hee Moon of Extreme Materials Research Center developed a photocatalyst that can completely decompose a trace amount of alcohol in water within a short duration by adding a very trace amount of copper to iron oxide, which is used as a catalyst during the advanced oxidation process.

The research team employed Fenton oxidation that uses oxidizing agents and catalysts during the advanced oxidation process for water treatment. Usually alcohols were used as reagents to verify radical production during Fenton oxidation in other advanced oxidation process (AOP) studies, they were the target for removal from semiconductor wastewater in this research.

This water treatment technology is expected to dramatically reduce the cost and water resources invested into the treatment of semiconductor wastewater. In the past, clean water with a volume 10 times higher than that of the wastewater under treatment was required for dilution of the wastewater in order to reduce the alcohol concentration of 10 ppm in the wastewater to less than 1 ppm.

If the photocatalyst developed by the KIST is used for water treatment, water resources can be saved. The research team applied the photocatalyst to wastewater from a semiconductor factory to prove that alcohol decomposition levels similar to those observed in the laboratory could be achieved in industrial practice.

"As large-scale semiconductor production lines are established, we expect that there will be a rapid increase in the demand for the treatment of semiconductor wastewater," said Dr. Kim. "The results of our research will provide a solution to effectively treat semiconductor wastewater using less resources and at a lower cost," he added.

/Public Release. This material from the originating organization/author(s) might be of the point-in-time nature, and edited for clarity, style and length. Mirage.News does not take institutional positions or sides, and all views, positions, and conclusions expressed herein are solely those of the author(s).View in full here.